Built to inform

Sign up for the daily newsletters

No, Thank you

Are you prepared for the enforcement of digital tyre monitoring?

Restrata’s David Nicholls explains how plans by the UAE’s ESMA to enforce tyre digital pressure monitoring are a logical consequence of tyre safety issues, and it will drive telematics adoption

David Nicholls, VP for situational awareness and telematics at Restrata.
David Nicholls, VP for situational awareness and telematics at Restrata.

David Nicholls is the VP for situational awareness and telematics at Restrata.

In recent weeks, the Emirates Authority for Standardisation and Metrology (ESMA) revealed plans to make the installation of digital tyre monitoring technology a legislative requirement in the UAE — and to enact the new rule as early as Q4 2017.

The move has no doubt been triggered by the UAE’s drive to improve road safety, which would be supported by a reduction in tyre failure incidents.

In 2016 Abu Dhabi police recorded 28 accidents, resulting in the deaths of 14 people and seven serious injuries, as being caused by tyre bursts. Across the UAE, tyre related accidents are responsible for around 5% of the country’s traffic death toll.

Common sense already dictates that the quality of tyres must play an essential role in road safety and that drivers and fleet managers should pay close attention to the condition of their tyres.

In the UAE and wider GCC region in particular, the sandy conditions and intense heat of the summer months take a toll on heavy goods vehicles.

Long trips, heavy loads and high speeds compound the stresses on tyres, placing a constant onus on the transport and logistics sector to monitor their fleets.

Despite this, and the fact that a good tyre can last for up to 50,000km – depending on driving habits and driving conditions – many tyre incidents in the region remain linked to the use of old tyres or poor-quality new tyres.

Older tyres and incorrect pressure might suffice in the cooler months, but road safety specialists claim that the hotter the tar on the roads and motorways, the better your wheels need to be to mitigate the risk of a blowout.

Compounding this problem is the flourishing market for counterfeit spare parts – and especially fake car parts, including brake components, clutch plates, engine internals and tyres.

Overall, the counterfeit industry is estimated to be worth $8.17bn (AED 30 billion) a year.

In order to prepare for the changes in legislation and mitigate the risks associated with poor tyres and driver behaviour, businesses should consider implementing a telematics solution.

The benefits of this are two-fold: not only will tyre pressure monitoring regulations require a degree of digital integration, but telematics also yields a wide range of data on fleet operations.

By leveraging this data fleet operators can empower themselves to improve their organisation and its processes, and ensure that their fleet and drivers are compliant with the law.

In the long-term, the analysis of telematics data can also provide valuable insights on the total cost of ownership of different peripherals and help drive the industry away from counterfeit products.

As ESMA and similar GCC bodies continue to press for advances in road safety, telematics implementation is an increasingly win-win option, while the disadvantages of it are fading fast. 

Most popular


Construction industry conversations around digitisation must evolve
The Middle East construction industry’s approach to tech must evolve and focus on how can


Construction Week's Leaders Kuwait 2019 summit kicks off today
More than 100 decision-makers from Kuwait's construction industry to convene at conference in Kuwait City
HKA: Volume of construction disputes to stay consistent in 2019
EXCLUSIVE: Consultancy’s Michael McSorley talks about methods to avoid and ‘speedily resolve’ construction disputes

Latest Issue

Construction Week - Issue 751
Oct 13, 2019